Function |
Description |
ASPI |
Frame
rate of the output video file. 25 (PAL) or 23.97,29.97 (NTSC).
Warning: this value is not automatically
set, if you choose a different frame rate from the input, a pull down
will be performed. Avoid conversion between NTSC and PAL.
Default is : 25 |
DeMacroVision:
|
Remove
macro vision protection from the movie.
Default is : Yes |
Dolby
Surround: |
Enable
Dolby Surround downmix.
Allow to preserve better 5.1 FX in stereo mode
Default is: Enabled |
Deinterlace
Filter: |
Use
this when your image is interlaced (when 1 line / 2 is shifted)
Warning: if you set odd or even field you
cannot be sure that it is the good field, Just make a clip of 10 images
to see if you're right. Interpolate mode interpolate the even field (you
lose a bit quality for SVCD but it always works)
Default is : None |
Key
Search:
|
Mode
for CSS key search (the mode 0 works fine in 99% of cases).
0 - Search a key one time when starting
1 - Search a new key at each VOB-ID
2 - Search a new key at each CELL-ID
3 - Search a new key at each VOB/CELL-ID combination
4 - Disabled
Default is : 0 |
CPU Type |
CPU calculation mode.
0 : MMX (works only on Intel MMX processors)
1 : 3DNow (for amd user)
2 : SSE2 for IntelP4 processor
3 : Normal (slow) don't perform MMX calcul
Default is : MMX |
Name
Rule: |
use
<title>, <chapter>, <artist>, <album>, <year>,
<genre>, <volume> to create an unique filename for each file,
You can also use backslash(\) to create folders.
Default is : <title>-<chapter>-<volume> |
Procress
Priority: |
The
program procress priority in system.
Default is : High |
Detect
24 FPS: |
Detect
automatically 24Hz progressive NTSC.
Default is : Yes |
Force
24 FPS:
|
Force
input to be a 24Hz progressive NTSC.
This flag works only if detect 24fps is checked. (Use it if you think
that the 24Hz detection doesn't work).
Default is : No |
Audio
Video synchronization:
|
synchronise
the audio & video on dvd
Default is : Yes |
Shut
Down: |
check
the box the program will shutdown the computer after job done |
Overwrite
file:
|
overwrite
the exsit file without asking
Default is : No |
Volume: |
Gain of the audio output.
No normalization is performed. A value of 1 can't generate distortion (cracking) but the output sound may be very low. The default gives a good volume for most DVDs.
Make few clip of the movie where you know the volume is high and adjust this value in order to get a good volume. You can also use the sound normalizer to find an optimum volume.
Default is : 3 |
Change color |
Change color while encoding |
Auto detect
|
|